How to Change WiFi on Samsung Smart Display
If your Samsung Smart Display moved to a new room, a new router, or a different network, you may need to reconnect it to WiFi.
This guide explains how to change WiFi on Samsung Smart Display smart display devices, what to do when the menu is hard to find, and how to fix the most common connection problems.
Samsung’s smart display interface can vary slightly by model and firmware, but the basic steps are similar across Smart Monitor and Smart Display products with built-in WiFi.
Knowing where the network settings live can save time and help you reconnect without factory resetting the device.
Before You Start
Check a few basics before you try to switch networks.
A stable router, the correct WiFi password, and physical access to the display make the process faster and reduce failed connection attempts.
- Have your WiFi network name ready
- Confirm the password is correct and case-sensitive
- Make sure the router is broadcasting on 2.4 GHz, 5 GHz, or both
- Keep the Samsung Smart Display close to the router during setup
- Know whether the device is already connected to an Ethernet cable, if applicable
If the display is still on the old network, you may also want to keep the old router active until the new connection is confirmed.
How to Change WiFi on Samsung Smart Display Smart Display
The process usually starts from the on-screen settings menu.
On most Samsung Smart Displays, you can change WiFi by opening the main settings, selecting network options, and choosing a new wireless access point.
Step 1: Open the Settings menu
Use the remote, joystick, or on-screen controls to open the Settings menu.
On many Samsung displays, this is represented by a gear icon.
Step 2: Go to Network settings
Look for General, Connection, or Network depending on your model.
Then select Open Network Settings, Network Status, or a similar option.
Step 3: Choose WiFi as the connection type
If the display is currently using a wired connection, switch to wireless if the menu allows it.
If it is already on WiFi, the menu will usually show available wireless networks.
Step 4: Select the new network
Choose the WiFi network you want to use.
If your router has separate 2.4 GHz and 5 GHz names, pick the one that works best for your location and device performance.
Step 5: Enter the password
Carefully type the WiFi password using the on-screen keyboard.
If the connection fails, recheck the password, network name, and any special characters.
Step 6: Confirm the connection
Once connected, the display should show a successful network status.
Test internet access by opening a streaming app, smart feature, or connected service if available.
Where the WiFi Settings Usually Live
Samsung uses slightly different menu labels across Smart Display and Smart Monitor models, but WiFi controls are commonly found in one of these locations:
- Settings > General > Network
- Settings > Connection > Network
- Settings > All Settings > Network
- Settings > Support > Device Care
If you cannot find the option, use the search feature in the settings menu if your model includes one.
Some Samsung interfaces also allow network setup during the initial onboarding screens after a reset or update.
How to Switch to a New Router
When replacing your router, the smart display may still try to connect to the old network name.
If the SSID changed, you must manually select the new WiFi name and enter the new password.
If the router name stayed the same but the password changed, the display may fail to reconnect automatically.
In that case, open the wireless settings, forget the old network if the option appears, and reconnect using the updated credentials.
For best results after a router swap, restart both devices:
- Power off the Samsung Smart Display
- Restart the router and wait for full internet service
- Turn the display back on
- Reconnect to the new WiFi network
How to Forget a Saved WiFi Network
Some Samsung devices let you forget the current WiFi profile before connecting to another one.
This is useful when a saved password is wrong, a router was replaced, or the display keeps trying to auto-connect to an unavailable network.
To forget a network, open the WiFi list, highlight the current network, and look for Forget, Delete, or Remove.
Then reconnect from the available network list.
If the option is missing, you can often achieve the same result by restarting the device or resetting the network settings through the system menu.
Troubleshooting Connection Problems
Even when the setup steps are correct, Samsung Smart Displays can still fail to connect because of router settings, signal issues, or outdated software.
The following checks solve many of the most common problems.
The network does not appear
If your WiFi network is missing from the list, move the display closer to the router and refresh the list.
Also verify that the router is broadcasting the SSID and that the network band is compatible with the device.
The password is rejected
Re-enter the password carefully.
Passwords are case-sensitive, and a typo in a symbol or number can block the connection.
If possible, copy the password from the router label or your router app.
The display connects but has no internet
This usually points to a router or ISP issue rather than a display problem.
Check whether other devices can browse normally, then restart the modem and router.
If the Samsung display still shows no internet, reconnect it after the network comes back online.
The signal is weak or unstable
Physical distance, thick walls, and interference from microwaves or other wireless devices can reduce signal quality.
For more stable performance, use 5 GHz for speed at short range or 2.4 GHz for better range.
When to Reset Network Settings
If repeated attempts fail, a network reset can clear saved wireless data without necessarily erasing your entire display setup.
This is a useful option when the device has stale credentials or network conflicts after router changes.
Look for a menu path such as Settings > General > Network > Reset Network or a similar system reset option.
After the reset, reconnect the display to WiFi as if setting it up for the first time.
Use this step only when basic reconnecting does not work, because it removes remembered WiFi profiles and may require you to sign in again to online features.
Best Practices for a Stable Samsung Smart Display Connection
Once you have changed the WiFi successfully, a few habits can help keep the display online.
Good router placement, secure credentials, and regular software updates all improve reliability.
- Keep the display within strong router range
- Use a unique network name and strong password
- Update the display firmware when prompted
- Avoid frequent router name changes
- Reboot the router occasionally if connections become inconsistent
If your home uses a mesh system, connect the display to the node with the strongest local signal.
For larger homes, this can make a noticeable difference in app loading and streaming stability.
Common Samsung Features That May Affect WiFi Setup
Some Samsung Smart Displays include extra features such as SmartThings integration, screen mirroring, voice assistants, and app-based control.
These services often depend on an active network connection, so a WiFi change may briefly interrupt them until the device fully reconnects.
If you use SmartThings, check that the display appears online in the app after switching networks.
If you use casting or mirroring, verify that your phone or PC is on the same WiFi band or compatible network segment when pairing.
For households with strict router security settings, it may also help to verify that MAC address filtering, parental controls, or guest network restrictions are not blocking the display.
Quick Checklist for Changing WiFi
- Open the Samsung Smart Display settings
- Go to Network or Connection settings
- Select the new WiFi network
- Enter the correct password
- Confirm internet access after connecting
- Restart the router if the connection fails
Using this checklist makes it easier to change WiFi on Samsung Smart Display smart display devices without guessing through the menus or relying on a full reset.
