Wondering what battery the ADT glass break sensor uses? It’s a CR123A lithium battery. This small, powerful battery keeps your sensor running smoothly. It lasts a long time, so you won’t have to change it often.
Plus, the replacement process is easy. Simply pop out the old battery and insert a new one. Your ADT sensor will be back to protecting your home in no time.
Keeping up with your sensor’s battery life ensures your security system works when needed.
Let’s dive into why the CR123A battery is the best fit for your ADT glass break sensor!
Table of Contents
How Do You Change The Battery In An ADT Glass Break Sensor?
Changing the battery in your ADT glass break sensor is quick and simple. Follow these steps to ensure your sensor stays functional and ready to protect your home:
- Locate the sensor: Find your ADT glass break sensor, typically mounted on a wall or ceiling.
- Turn off the system: Disarm your ADT security system to prevent any alerts during the process.
- Remove the cover: Gently twist or slide off the sensor’s cover to access the battery compartment.
- Take out the old battery: Remove the old CR123A battery from the compartment.
- Insert the new battery: Place a fresh CR123A lithium battery in the correct position.
- Close the sensor: Reattach the cover by snapping or twisting it back into place.
- Test the sensor: Arm your ADT system and test the sensor to ensure it works properly.
How To Replace ADT Wireless Glass Break Sensor Battery
Replacing the battery in your ADT wireless glass break sensor is a straightforward task. Just follow these easy steps to keep your sensor working efficiently:
- Locate the sensor: Find the ADT wireless glass break sensor, usually installed on a wall or ceiling.
- Disarm the system: Turn off your ADT security system to avoid any unnecessary alarms.
- Open the sensor cover: Carefully remove the sensor’s cover by twisting or sliding it off.
- Remove the old battery: Take out the depleted CR123A battery from its compartment.
- Insert a new battery: Place a fresh CR123A lithium battery in the correct orientation.
- Close the cover: Reattach the sensor’s cover securely by twisting or snapping it back in place.
- Test the sensor: Arm your system and perform a test to ensure the sensor is functioning properly.
How To Open ADT Glass Break Sensor
Opening your ADT glass break sensor is a simple process. Follow these steps to access the battery compartment or perform maintenance:
- Turn off the system: Disarm your ADT security system to avoid triggering any alarms.
- Locate the sensor: Find the ADT glass break sensor on your wall or ceiling.
- Look for the cover seam: Identify the seam where the sensor cover attaches to the base.
- Twist or slide the cover: Depending on the model, either twist or gently slide the cover off.
- Access the inside: Once the cover is off, you’ll have access to the battery or sensor components.
How To Reset ADT Glass Break Sensor?
Resetting your ADT glass break sensor is often necessary after replacing the battery or troubleshooting. Here’s how to do it:
- Disarm the system: First, disarm your ADT security system to prevent any alerts.
- Open the sensor: Twist or slide off the sensor cover to access the inside.
- Remove the battery: Take out the CR123A battery to cut the power to the sensor.
- Wait for 30 seconds: Leave the battery out for about 30 seconds to allow the system to reset.
- Insert the battery: Place the battery back into the compartment and reattach the cover.
- Test the sensor: Arm your system and perform a test to ensure the sensor is working correctly.
ADT Glass Break Sensor False Alarm?
Experiencing a false alarm from your ADT glass break sensor can be frustrating, but it’s often caused by environmental factors or sensitivity settings. Here’s what you can do:
- Check the surroundings: Loud noises like slamming doors or dropping heavy objects can trigger the sensor.
- Adjust sensitivity settings: Lower the sensitivity level in your ADT system to reduce the chances of false alarms.
- Ensure proper installation: Make sure the sensor is correctly mounted and not too close to loud appliances or speakers.
- Contact ADT support: If the issue persists, reach out to ADT for troubleshooting or replacement options.
Wrap Up
The ADT glass break sensor uses a CR123A lithium battery. This small yet powerful battery keeps your sensor running efficiently.
With its long life, you won’t need to replace it often. When the time comes, swapping out the battery is a quick and easy task.
Keeping your sensor’s battery fresh ensures your home security system works at its best.
So, stay ahead of the game and check your sensor’s battery regularly. Now you know exactly what to do when it’s time for a replacement!
Frequently Asked Questions
What type of battery does the ADT glass break sensor use?
The ADT glass break sensor typically uses a CR123A lithium battery. This type of battery provides long-lasting power and reliable performance, ensuring your security system remains operational and effective in detecting any potential glass breakage.
How long does the battery last in the ADT glass break sensor?
The battery life of an ADT glass break sensor varies but generally lasts between 2 to 5 years, depending on usage and environmental conditions. Regularly checking the battery status can help maintain optimal functionality for your security system.
How do you change the battery in the ADT glass break sensor?
To change the battery in your ADT glass break sensor, first remove the sensor from its mounting. Open the battery compartment, replace the old CR123A lithium battery with a new one, and securely close the compartment before reattaching the sensor.
Can I use a different battery in the ADT glass break sensor?
It’s not recommended to use a different battery type in the ADT glass break sensor. Using a CR123A lithium battery is essential for ensuring proper performance and compatibility, as other batteries may not provide sufficient power or could damage the device.
References:
help.adt.com. Sensor Battery Replacement. https://help.adt.com/s/article/Sensor-Battery-Replacement